ICROSS is designed to make getting out on the water simple. No roof racks. No trailers. No heavy lifting. Everything fits in one bag — board, chair, pump, paddle, and fin. Unpack, inflate, set up the seat, and you’re on the water within minutes.
Once inflated, the drop-stitch construction becomes incredibly rigid, giving you the stability of a hard board with the convenience of something you can carry over your shoulder.
1. Unpack and Prepare
Roll out your ICROSS on a flat, clean surface.
Open the valve cap and twist the valve button to the OUT position (inflate mode).
Attach the pump hose firmly to both pump and valve.
2. Inflate to the Right PSI
Pump until the board reaches the recommended pressure — 7–10 PSI depending on model and water temperature.
You’ll feel the board stiffen quickly as the drop-stitch core expands.
Do not exceed 16 PSI, as higher pressure can damage the board.
In hot weather, inflate on the lower end of the range — heat naturally increases internal pressure.
In cold conditions, pressure drops slightly, so bring the pump along for adjustments.
3. Attach the Fin and Seat
Slide the fin into the track underneath the board and secure it with the pin.
Thread the chair straps through the D-rings and tighten them evenly.
Adjust until the ICROSS sits flat when you sit in the chair.
Clip your paddle leash to a front D-ring.